Problem
The following error appears when launching interpreterQ :
Attention
Please pay attention if the error popup is exactly the same as the screenshot above. A very similar popup may appear with a different error text. Compare with following topic to ensure you are on the correct troubleshooting page :
Error: cannot connect to the conference room server
Cause
This error message means that the ERS client has been started on the Control PC, but cannot connect to the Conference Central Unit.
Solution
Try rebooting the conference system.
After reboot, open a browser on the Control PC and surf to the IP address of the central unit to verify the unit is available on the network. On the central unit home page, check the setting Plixus Core = connected :